Broilmaster B101652, DCB1-2 Patio Base Installation, NOTICE Assemble post before assembling grill

Patio Base Installation

NOTICE: Assemble post before assembling grill.

The SS26P and BL26P Patio Bases are only for use with Broilmaster Gas Grills. Before proceeding with installation read your Owner’s Manual for the proper location and minimum clearances to com- bustible materials for your grill and in-ground post.

Verify that all parts listed in the exploded view of this product have been included before beginning this installation.

Recommended Tools:

•Drill/Driver

•Two adjustable wrenches or a socket set

•A medium Phillips screwdriver

•Pipe thread sealer or Teflon tape (for gas connections)

•Soapy water solution (to test for leaks)

2.Fasten the bottom of the post to the cast base using 1/4 x 1/2 Lock Washers, and 1/4-20 x 1 1/2 Hex Head bolts. See Figure 2. Anchor the cast iron patio base to your patio using the two holes provided in the base. (Hardware not included)

Note: Make sure that the large rectangular cut out is facing in the direction that you want your grill to face.

1.For Stainless Steal Posts attach lower bracket assembly to post with eight Hex Head #10-1/2” Self Drill screws. For Black Posts, secure lower bracket assembly to post with eight 10 x 1/2 Hex Head screws. See Figure 1. Use black screws for black posts and stainless steel screws for stainless steel posts.

NOTE: The large rectangular cut out is located at the front of the post near the top.

Figure 2

3.Insert the stainless steel flex tube assembly into the post. The inlet side of the gas tubing may protrude from the bottom of the patio base or through the large circular hole in the back of the square post. See Figure 3. Note: Do not attempt to cut or alter the flex tube in any way.

Figure 3

4.Attach the grease cup bracket assembly to the bottom of the grill casting and fasten with #10-24 x 3/4” bolt, 9/32 ID x 5/8 OD washer, and #10-24 wing nut. See Figure 6.

Use only the supplied grease cup or noncombustible contain- ers for the grease cup (aluminum or tin cans). DO NOT use combustible containers such as paper or Styrofoam cups.

Figure 1

Page 14 Figure 4 B101586-4-0112