Broilmaster SS48G-1 Cart Assembly, For Grill Heads other than R3 Series, continue on to Step

Cart Assembly

9.For Grill Heads other than R3 Series, continue on to Step 10.

For R3 Series Grill Heads: Press in the two sides of the

Control Housing (provided with Grill Head) and fit it into the opening under the grill head as shown in Figure 10. Grill Assembly will look like Figure 11.

Note: It may be easier to insert one side of the control housing first, and then press in the other side using the cart as a brace for the inserted side.

Figure 10

Figure 11

10.Mount the tank retainer to the cart by using 1/4-20 x 1 1/4 Phil- lips Truss Head screw and 1/4-20 wing nut.

Figure 12

10.Install Grease Cup by sliding it in the cutout provided in the shield.

Figure 13

11.For Stationary Cart Assembly: Slide grill assembly into posi- tion over holes drilled in Step 1. Secure with three screws (not supplied). If applicable, route the gas line through the hole and attach to the grill.

Page 10 B101586-4-0112