3.Attach the grease cup bracket assembly to the bottom of the grill casting and fasten with
Use only the supplied grease cup or noncombustible contain- ers for the grease cup (aluminum or tin cans). DO NOT use combustible containers such as paper or Styrofoam cups.
Note: Grill top comes assembled to the bottom. For ease of as- sembly, remove grill top.
6.Place the grill bottom on top of the post and secure the grill bottom to the post by placing four
Figure 3
4.For Grill Heads other than R3 Series, continue on to Step 5.
For R3 Series Grill Heads: Bend the tabs on the Post Cover Plate to 90° as shown in Figure 4. Two different size cover plates are included with the R3 Series Grill Heads. Choose the plate that will best fit your post.
Note: If using the stainless steel Post Cover Plate, bend the tabs so they face away from the protective film. Remove the protective film after bending the tabs.
Figure 6
Installing old grill head P3 or P4 to new patio post.
A B101668 kit will need to be used to cover the opening in the post. See the instructions with the kit for further installation information.
PROTECTIVE
FILM SIDE
COVER PLATE
Figure 4
5.For R3 Series Grill Heads: Slide the Post Cover Plate onto the front of the post. Slide the Upper Brack-
et onto the post. Secure the Post Cover Plate and Up- per Bracket to the top of the square post using four #10 – ½ Hex Head screws. See Figure 5.
For Grill Heads other than R3 Series: Slide the Upper Bracket into the post. Secure the Upper bracket to the top of the square post using four #10 – ½ screws. See Figure 5.
Figure 7
| Figure 5 |
Page 21 |
