
GRILL ASSEMBLY
9.Fasten the lid handle to the grill body top with two
Figure 29
10.R3B models only: Place the briquet rack over the blue flame burner only. See Figure 30.
11.R3B models only: Position the
90° ANGLE ON BRIQUETTE RACK TO CENTER OF GRILL
Figure 30
12.Set the cooking grids.
13.Push valve knobs on to valves.
Note: Control Housing is used only when installing grill head onto cart. See the instructions that come with the cart for Control Housing installation instructions.
Lid Stop
Attach the lid stop assembly to the grill bottom as shown in Figure 31.
Lid stop assembly hardware
Figure 31
Page 36 |