Broilmaster P3SXN-1 manual Installing Racks, See Figures 16a and 16b, See b, Cleaning

GRILL ASSEMBLY

Installing Racks

Place the briquet rack or on the burner assembly.

Position the flare busters on the briquette rack or the ceramic briquets evenly on the briquette rack without overlapping.

See Figures 16a and 16b.

For Smoker Shutter installation see DPA100 manual included with your P3SX grill.

Set the multilevel cooking grids. See Figures 17a and 17b.

Installing Char-Master Briquets

Individually place the ‘Char-Master’ briquets in a single layer evenly on your grill’s briquet rack; DO NOT dump them onto the briquet rack. A single layer of ‘Char-Master’ briquets is all that’s needed. DO NOT overlap or stack the briquets.

See Figure 17b.

After properly placing the ‘Char-Master’ briquets on your grill’s briquet rack, there may be some briquets left over. Save them for future use.

Before cooking, always preheat the grill as directed by the grill’s operating instructions. Hot briquets cause better, quicker cooking and better flavor.

Cleaning

Routine preheating and routine burn-off (also called post- heating) of a grill will clean the ‘Char-Master’ briquets. Peri- odically turn the briquets over while they are cool.

Note for H3 Package Owners: The side shelf must be in- stalled before installing the Briquets and Briquet Rack. See side shelf installation on page 51.

Figure 17a

Figure 17b

Page 26 B101525-4-0411