Broilmaster P3SXN-1 manual Drop-Down Side Shelf Installation

Drop-Down Side Shelf Installation

Solid Surface Drop-Down Side Shelf

1.Remove the cooking grids, briquets and briquet rack from the grill.

2.Attach the Bracket Attach Assembly to the grill using the Truss Head Screws, Flat Washers, Lock Washers, and Nuts. See Figure 38.

3.Place the Side Shelf upside down on a clean surface and use the four coarse-thread screws to loosely attach the Support Brackets.

4.Place the support stiffener on the inside of the shelf using

(2) #10-16x1/2” screws to secure in place.

5.Hang the shelf brackets on the lower pins of the Bracket Attach Assembly. Tighten the four screws to secure the bracket arms to the shelf. See Figure 39.

6.To raise the shelf - swing it out and lift the notches over the upper pins. Make sure the shelf is securely in position before placing anything on it.

7.To lower the shelf - lift up on both brackets simultaneously and pull out slightly.

Figure 39

Figure 40

1

4

2

3

		5
Index	Part No.	Description
No.
1	B100561	Side Shelf
2	B100568	Support Bracket Front - Stainless Steel
2	B100559	Support Bracket Front - Black
3	B100569	Support Bracket Back - Stainless Steel
3	B100560	Support Bracket - Back - Black
4	B101370	Bracket Attach Assembly
5	B100993	Shelf Support Stiffener

Figure 41

B101525-4-0411 Page 51