10 - 18 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Packing and shipping the machine
Whenever you transport the machine, use the packing materials that
came with your machine. If you do not pack the machine proper ly,
you could void your warranty.
Caution
It is important to allow the machine to ‘park’ the print head after a
print job. Listen c arefully to the mach ine before disconne cting it from
the power source to ensure t hat all mechanical noise has stoppe d.
Not allowing the machine to complete this parking process may lead
to print problems and possible damage to the print head.
1
Close the document support and the document tray.
2
Lift the top cover to the open position until it locks securely into
place.
3
Remove all the ink cartridg es and attach the protective parts .
(See Replacing the ink car tridges on page 10-23.)
Caution
If you are not able to find the protective parts, do NOT remove the ink
cartridges before shipping. It is essential that the machine be
shipped with either the protective parts or the ink cartridges in
position. Shipping w ithout them will cause da mage to your machine
and may void your warranty.
When attaching the protect ive parts, make sure it
clips into place as shown in the diagram.