Using the machine as a printer
1 - 2
1
Printing from the manual feed slot
Note
■The machine automaticall y turns on the Manual Feed mode when you pu t paper in the manual feed slot.
■The machine illustrations are of the MFC-7420 or MFC-7820N, but the descriptions apply to all the
models.
1Set the Paper Size, Media Type, Paper Source, and other settings in the printer driver.
Set the Paper Source to Manual.
2Slide the paper guides to fit the paper size.
3Using both hands put paper in the manual feed slot until
the front edge of the p aper touches the pap er feed roller.
Hold the paper in this position until the printer
automatically feeds i t in for a short distance, an d then let
go of it.
4Send the print data to the machine.
Note
■Put the paper into the manu al feed slot with the side to be pr inted face up.
■Make sure that the paper is straight and in the proper position on the manual feed slot. If it is not, the paper
may not be fed properly, resu lting in a skewed printout or a paper jam .
■Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam.
5After the printed page comes out of the machine, put in the next sheet of paper as in Step 3 above.
Repeat for each page that you want to print.