Using your machine with a Macintosh®
7 - 34
7
COPY
The Copy buttons (1-4) can be customized to allow you to
take advantage of the featur es built into the Brother printer
drivers to do advanced copy functions such as N-in-1 printing.
Before you can use the Copy buttons you must first configure
the printer driver by click ing on the button while holdi ng down
the Ctrl key.
You can enter up to a 30 charac ter name in the Name for
Copy field and select Copy Ratio.
You can select the Resolution, Scan Type, Document Size,
Brightness and Contrast settings to be used.
Before finishing the Copy button configuration, you must set
the Printer Name. Then select your print settings from the
Presets pull-down list, then click OK to close the window. By
clicking the configured copy button, the print dialog window
will open.
Note
■You must configure each of the copy buttons before they can be used.
■Using the Copy button, you can also send a fax usi ng the printer driver. (See Sen ding a fax from your
Macintosh® application (not available for DCP-7020) on page 7-9)