PRINTING REPORTS 9 - 1
9

Fax settings and activity

You need to set up the Transm ission Verification Report and Fax
Activity Report Interval in the menu table.
Press Menu, 2, 4, 1.
—OR—
Press Menu, 2, 4, 2.

Customizing the Transmissi on Verification

Report

You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whet her the
transmission was successful (OK). If you select On or On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again. Selecting
On+Image or Off+Image will print a section of the fax’s first page
on the report to help you remember.
1
Press Menu, 2, 4, 1.
2
Press or to select Off,
Off+Image, On or On+Image.
Press Set.
3
Press Stop/Exit.
Printing reports
When the feature is Off, the Report will only print if there is a
transmission error. (NG).
Setup Reports
1.Transmission
Setup Reports
2.Act Interval
Transmission
Off