Using the Settings Key 195
6
——
———————————————————————————————————————————————————————————————————
—
———————————————

■Page 3

BReserved Needle
A certain thread color can be set to a specific
needle bar. The specified color remains
assigned to the needle bar s pecified here until
the setting is cancelled. This feature is not
accessible through the embroidering screen.
(Refer to “Reserved Needle Bar Settings” on
page 132.)

■Page 4

CScreen Saver
Select the length of time until the screen saver
appears, and change the image of the screen
saver. (Refer to page 201.)
DOpening Screen
The machine can be set so that the opening
screen is either displayed (“ON”) or not
displayed (“OFF”) when the machine is turned
on.
ELight
The sewing light can be set to be turned either
on or off. (Refer to page 20 or 203.)
FSpeaker
The volume of operation sounds and alarm
sounds can be adjusted. (Refer to page 21 or
204.)
GThread Sensor
Set “Thread Sensor” to either “ON” or “OFF”.
(Refer to page 204.)
HMouse Pointer
Change the shape of the pointer when a USB
mouse is used. (Refer to page 205.)

■Page 5

IUnits of Measure
Enables the units of measurements that appear
in the screens to be changed. (Refer to
page 205.)
JLANGUAGES
Enables the display language to be changed.
The keys and messages appear in the selected
language. (Refer to page 205.)
KThe Total Count counter shows the total
number of stitches sewn, and the Trip Count
counter show the number of stitches that have
been sewn since the machine’s last
maintenance.
LThe Total Time counter shows the total amount
of time that the machine has been used, and the
Trip Time counter shows the amount of time
that the machine has been used since its last
maintenance.
Use counters K and L as a standard for
performing periodic maintenance and for receiving
maintenance for the machine.
MThe “No. ##” is the number for the embroidery
machine.
NVersion
Shows the version of the software installed on
this embroidery machine. (Refer to page 271.)
Note

●Check with your local authorized Brother

dealer or at “http://solutions.brother.com”

for details on available updates.

Details of each of the settings are described in the

following sections. After specifying the desired

settings, touch to return to the screen that

was displayed before the settings screen was

displayed.

Note

●Some settings cannot be changed while

sewing.

B
H
G
C
F
E
D
L
N
K
J
I
M