Brother 884-T09 Setting up the optional bobbin winder, Connecting the AC adapter

Using the Optional Bobbin Winder 241
7
——
——————————————————————————————————————————————————
—
————————————————————————————————
Setting up the optional
bobbin winder
Attach the spool pin, spool cushion and thread
guide to the bobbin winder.
1Insert the spool pin and the spool cushion.
Lower the holder, and then insert the spool
pin straight into the hole. And insert the spool
cushion.
1Spool pin
2Spool pin holder
3Hole for spool pin
4Spool cushion
2Insert the thread guide.
Insert the thread guide straight into the hole
with the pins on the thread guide aligned
with the notches on the sides of the hole.
1Pins on thread guide
2Notches on hole for thread guide
3Hole for thread guide
• Firmly insert the thread guide as far as
possible and make sure that it is secure.
Connecting the AC adapter
1Insert the plug of the power supply cord into
the AC adapter.
2Plug the cord on the AC adapter into the DC
input connector of the bobbin winder, and
then insert the plug of the power supply cord
into a household electrical outlet.
• Be sure to firmly insert the plug on the AC
adapter into the DC input connector of the
bobbin winder.
CAUTION
●Be sure to use the included AC adapter.
Using any other AC adapter may result
in damage.
●Before connecting or disconnecting the
AC adapter, be sure that the unit is not
operating.
●After using the bobbin winder,
disconnect it from the electrical outlet.