Brother 884-T09 Winding the bobbin

APPENDIX ——————————————————————————————————————————————————————————————————————————
——
242
Winding the bobbin
Prepare the bobbin and the spool of bobbin thread.
Use cotton or spun polyester bobbin thread (from
74 dtex/2 to 100 dtex/2).
1Align the groove in the bobbin with the
spring on the bobbin winder shaft, and s et
the bobbin on the shaft.
1Groove in the bobbin
2Spring on the shaft
2Set the thread spool on the spool pin.
1Thread spool
2Spool pin
Note
●When using a small spool, remove the
spool cushion and set the spool directly
onto the spool pin. Also use the included
spool cap to keep the small spool stable.
3Pass the thread through the hole in the left of
the thread guide toward the front of the
winder.
1Hole in the thread guide
4Pass the thread around the tension disc as
shown in the illustration. Make sure that the
thread is correctly fed into the tension disc.
1Tension disc