Using the Optional Cap Frame 235
7
——
——————————————————————————————————————————————————
—
————————————————————————————————
aPull the ends of the cap out from the center
to remove any slack.
bUse the clips to secure the cap.
1Clips
• Repeat steps a and b on the other side to
remove any slack and secure the cap with
the clips.
cPull the brim holder up as far as possible.
Next, turn the brim holder over the cap
brim, and then lower the brim holder.
1Brim holder
2Centerline of brim holder
• Fully lower the brim holder so that the
centerline on the brim holder is visible.
dAdjust the brim so that it maintains a
rounded shape.
XThis completes the positioning of the cap
in the cap frame.
eRemove the cap frame from the mounting
jig.
Press both right and left holders on the
mounting jig with both thumbs, and then pull
off the embroidery frame, as shown in the
illustration.
1Holder