Brother 884-T09 Using the Optional Cap Frame 233

Using the Optional Cap Frame 233
7
——
——————————————————————————————————————————————————
—
————————————————————————————————
3Secure the stabilizer with the pins on the cap
frame.
1Pins
• Make sure that the pins go through the
stabilizer to firmly secure it.
4Lift up (flip) the sweat guard on the inside of
the cap, and then place the cap in the cap
frame.
Using both hands, hold both sides of the cap,
and then align the edge of the lower frame
with the base of the brim.
1Edge of the lower frame
2Sweat guard
3Base of the brim
At the same time, align the centerline of the
cap with the centerline of the sweat guard
holder on the cap frame, and then slide the
sweat guard under the sweat guard holder.
1Sweat guard holder
2Centerline of sweat guard holder
3Centerline of cap
5Align the centerline of the cap with the
notch in the mounting jig.
1Centerline of cap
2Notch in mounting jig
6Place the sweat guard of the cap inside the
notch in the cap frame.
1Notch in cap frame
7Close the clamping frame so that the brim of
the cap passes between the inside clamping
frame and the outside clamping frame.
1Brim of the cap
2Inside clamping frame
3Outside clamping frame