BASIC SETTINGS AND HELP FEATURE —————————————————————————————————————————————————————————
——
194
Using the Settings Key

Touch (settings key) to change many of the basic embroidery machine settings.

Understanding the settings screen

There are five pages in the settings screen. Touch and in the lower-center of the screen until the

desired page is displayed. The key appears on all pages.

■Page 1

1Touch to quit specifying settings. The settings
are confirmed and the screen that was
displayed before the settings key was touched
appears again.
2The guides (embroidery frame size, centerpoint
marker, grid and cursor) for the pattern display
area can be specified. (Refer to page 196.)
3CHANGING THE THREAD COLOR DISPLAY
The color information in th e thread color
sequence display and the needle bar thread
information can be switched to the color name,
the thread brand and color number or the
sewing time. (Refer to page 197.)
4Thumbnail Size
Specifies whether the size of image keys that
appear when selecting a pattern from the
pattern list screen are displayed “Small” or
“Large”. (Refer to page 198.)
5Embroidery Background Color/Thumbnail
Background Color
Depending on the color of the embroidery,
changing the background color of the pattern
display area and thumbnails may make them
more visible and easier to select. (Refer to
page 199.)

■Page 2

6“DST” Setting
Specifies whether or not jumpstitches are cut. In
addition, when using Tajima embroidery data
(.dst), you can specify whether or not the thread
is cut according to the specified num ber of
jump codes. (Refer to page 199.)
7Short Stitch Delete
Specifies the pitch length of short sti tches that
are to be deleted. (Refer to page 201.)
8Thread Tail
Specifies the length of upper thread that
remains threaded through th e needle after the
thread is trimmed (length of thread p assed
through the eye of the needle). (Refer to
page 201.)
9Basting Distance
Specify the distance between the pattern and
the basting stitching. (Refer to page 116.)
0Appliqué Distance
Specify the distance between the appliqué
pattern and the outline. (Refer to page 117.)
AUse the Application Check when running an
application.
Note

●If the settings for “DST” Setting 6 or Short

Stitch Delete 7 are changed from the

previous setting, the new settings are only

applied to the next embroidery.

1
5
4
3
2
A
0
6
9
8
7