Manuals / Brother / Household Appliance / Sewing Machine

Brother 885-S25/S27 operation manual Lower Threading for models equipped with a quick-set bobbin

Models: 885-S25/S27

1 52

Download 52 pages 63.59 Kb

Page 21

4Hold the end of the thread, push the bobbin down with your finger, and then pass the thread through the slit, as shown.

Lower Threading (for models equipped with a quick-set bobbin)

This feature is only available on certain models.

CAUTION

1

5Reattach the bobbin cover. Put the left tab in place (see arrow 1), and then press lightly on the right side (see arrow 2) until the cover clicks into place.

2

1

•Replace the cover so that the end of the thread comes out from the left side of the cover (as shown by the line in the illustration).

●Winding the bobbin improperly may cause the thread tension to loosen, breaking the needle and resulting in injury.

12

1Wound evenly

2 Wound poorly

●The bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the enclosed bobbin or bobbins of the same type (part code: SA156, SFB (XA5539-151)).

Actual size

11.5mm (7/16 inch)

This model

Other models

CAUTION

●Be sure to turn off the power. If you accidentally step on the foot controller and the machine begins to operate, injury could result.

19

Image 21

Brother 885-S25/S27 operation manual Lower Threading for models equipped with a quick-set bobbin

Contents

Appendix Important Safety Instructions For Users in the UK, EIRE, Malta and Cyprus only Please Read These Instructions Before YOU USE the Machine UNPACKING/REPACKING InstructionsContents Appendix Main Parts Knowing Your Sewing MachineOptional Accessories AccessoriesConnecting Plugs Using Your Sewing MachineFoot Controller Main Power and Sewing Light SwitchChecking the Needle Replacing the NeedleTouches the stopper, and securely tighten Changing the Presser FootFlat Bed Attachment Using a Free-arm Style1Slideopen theit. flat bed attachment to the left to 1Slide the flat bed attachment to the left to release itControls Pattern Selection DialStitches Pattern Recommended Instruction Patterns and Stitch NamesWidth Manual3/16 Fixed 3/32 Stitch Length Dial Stitch Width Dial Stretch StitchingReverse Sewing Lever Stitches Selecting a Stretch StitchWinding the Bobbin Threading the MachineWound evenly Wound poorly Lower Threading Lower Threading for models equipped with a quick-set bobbin Follow steps 1 and 2 from Lower Threading Upper Threading Raise the presser foot using the presser foot lever6Putneedle.the thread behind the guide above Hook Thread Sewing with a Twin Needle Drawing up the Lower ThreadThread Tension Fabric Type Thread Size of Needle FABRIC, THREAD, and Needle CombinationsSize MediumStraight Stitching Please Read Before SewingPattern Fixed 16-0Stitch Stitch Name Zigzag StitchingZigzag Stitch Zigzag StitchShell Tuck Stitching Blind Hem StitchingStitch 3/16Elastic Stitching 4Sew at a slow speedElastic Stitch Patchworking Double Action StitchingOveredge Stitching StitchFeather Stitching Triple Zigzag Stretch StitchingFixed 3/16 Decorative Stitching Making a Buttonhole Stitch PatternPattern Adjusting Buttonholes Other Sewing ButtonsZipper Insertion Using Attachments and ApplicationsDarning GatheringFoot Stitch AnyMonogramming Embroidering AppliquésStitch Width Zigzag Stitch AnyKeep fingers away from moving parts, especially needles Using the Walking Foot Optional AccessoriesStitch Plate Using the Quilting FootUsing the 1/4-inch Quilting Foot 16-3/32Quickly Stitch Together a Quilt Cleaning MaintenanceChanging the Light Bulb Put the light cover back on and fasten the screw0Install the needle plate cover Symptom Possible cause How to put it right Reference TroubleshootingOr breaks LowerThread ten Fabric isSkipped Stitches areThere is a high Pitched noise While sewingNumerics IndexEnglish