Brother 885-S25/S27 operation manual Threading the Machine, Winding the Bobbin

KNOWING YOUR SEWING MACHINE ———————————————————————————————————————

THREADING THE MACHINE

Winding the Bobbin

CAUTION

●Only use bobbins (part code: SA156, SFB (XA5539-151)) that have been designed for this sewing machine. Using other bobbins may cause damage to the machine.

●We designed the bobbin that comes with this machine. If you use bobbins from other models, the machine will not work properly. Only use the bobbin that comes with this machine or bobbins of the same type (part code: SA156, SFB (XA5539-151)).

Actual size

11.5mm (7/16 inch)

This model Other models

1

2

1Pre-tension disk

2Bobbin winder shaft

1Put the spool of thread on the spool pin and pass the thread around the pre-tension disk.

CAUTION

●If the spool of thread is not in the right place, the thread may tangle on the spool pin.

2Pass the end of the thread through the hole on the bobbin from the inside of the bobbin.

3Put the bobbin onto the bobbin winder shaft and slide the bobbin winder shaft to the right. Turn the bobbin clockwise, by hand, until the spring on the shaft slides into the groove of the bobbin.

2

1

1Spring on the shaft

2 Groove of the bobbin

16