CHAPTER 4 OPTIONS

This printer can accept memory SIMM with the following specifications:

Speed

60 nsec - 80 nsec

 

 

Pin type

72 pin

 

 

Height

25.4 mm (1.00”) or less

 

 

Output

32 bit or 36 bit

 

 

✏Note

yAdditional memory is useful and may be necessary if you are using the Page Protection function.

(For HL-1440 users)

yThe resident memory of HL-1440 printer is 2 MB, you need to expand the printer memory by adding a SIMM to print at 1200 dpi.

(For HL-1470N users)

yYou have to expand the printer memory by adding a SIMM to use the FTP/IPP protocol.

✏Note

The printer has only one slot for a SIMM upgrade. If you want to increase your printer memory again after you have already installed a SIMM module in the slot, you will need to remove the previously installed SIMM.

4-3