5 - 26 ROUTINE MAINTENANCE
10
Clean the OPC belt cartridge and the OPC belt cartridge case with a dry cotton cloth.
Figure 5-43
11
Release the lock levers to remove the charging roller from the OPC belt cartridge.
12
Clean the area where the charging roller is to be installed with a cotton cloth.
Figure 5-46
13
Clean the surface of the charging roller with a cotton cloth.
Figure 5-47
14
Put the charging roller back on the OPC belt cartridge.
15
To secure the charging roller, move the lock levers back to their original positions.
Figure 5-44 Figure 5-45
■Make sure you do not damage the brush of the charging roller.
■Do not use volatile liquids such as thinner or benzene.