Printing Methods

 

i <For printing envelopes only>

 

When you have finished printing, reset the two gray levers which are pulled down at step b back to the

 

original position.

 

Note

 

2

 

• Remove each sheet or envelope at once after printing. Stacking the sheets or envelopes may cause the paper to jam or curl.

•If envelopes get smudged during printing set the Media Type to Thick Paper or Thicker Paper to increase the fixing temperature.

•If envelopes are creased after they are printed, see Improving the print quality on page 128.

•(For Windows® users) If DL size double flap envelopes are creased after printing, choose DL Long Edge in Paper Size, from the Basic tab. Put a new DL size double-flap envelope in the MP tray with the longest edge of the envelope in first, then print again.

•When you put paper in the MP tray, remember the following:

•Put the leading edge (top of the paper) in first and push it gently into the tray.

•Make sure that the paper is straight and in the proper position in the MP tray. If it is not, the paper may not be fed properly, resulting in a skewed printout or a paper jam.

23