Control Panel

 

 

LED

Printer status

 

 

 

 

 

 

 

No tray

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The paper tray was not detected, install it, or ensure it is inserted correctly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Paper jam

 

 

 

 

 

 

 

Clear the paper jam. See Paper jams and how to clear them on page 119. If the

 

 

 

 

 

 

 

printer does not start printing, press Go.

 

 

 

 

 

 

 

The Paper LED will turn on for 0.5 seconds and off for 0.5 seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Incorrect paper size for auto DX

4

 

 

 

 

 

 

Press Go or Job Cancel. Set the correct paper that you want to use, or load the

 

 

 

 

 

 

 

 

 

 

 

 

 

same size paper that you selected in the current driver setting. The paper size you

 

 

 

 

 

 

 

can use for automatic duplex printing is A4.

 

 

 

 

 

 

 

The Paper LED will turn on for 0.5 seconds and off for 0.5 seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Size mismatch

 

 

 

 

 

 

 

Put the same size paper in the paper tray or MP tray that is selected in the printer

 

 

 

 

 

 

 

driver, and then press Go.

 

 

 

 

 

 

 

Paper jam (back cover or duplex tray)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clear the paper jam. See Paper jams and how to clear them on page 119. If the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

printer does not start printing, press Go.

 

 

 

 

 

 

 

The Back Cover LED will turn on for 0.5 seconds and off for 0.5 seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Duplex disabled

Close the back cover of the printer and put the duplex tray back in.

Fuser cover is open

Close the fuser cover which can be found behind the back cover of the printer.

The Back Cover LED will turn on for 0.5 seconds and off for 0.5 seconds.

79