4 Control Panel
LEDs (Light Emitting Diodes)
This section refers to five LEDs Back Cover, Toner, Drum, Paper, Status and two buttons Job Cancel and Go on the control panel.
1) Back Cover LED | 4 |
The Back Cover LED indicates when errors | |
occur in the back of the printer. |
|
2) Toner LED
The Toner LED indicates when the Toner is low or at the end of its life.
3) Drum LED
The Drum LED indicates when the Drum is nearing the end of its life.
4) Paper LED
The Paper LED indicates when the printer is in one of the following states: No paper / Paper jam / Cover open
5) Status LED
The Status LED will flash depending on the printer status.
6) Job Cancel button
1 Job Cancel / ALL Job Cancel
7) Go button
The LED indications shown in the table below are used in the illustrations in this chapter.
|
| LED is off. |
|
| The LED is dimmed. |
or | or | LED is on. |
or | or | LED is blinking. |
75