Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-5370DW)

Note

•Make sure that the label covering the USB interface connector is removed.

•Use a pointy object such as a ballpoint pen to press the button.

d The machine will print a piece of paper that shows an 8 digit PIN and starts searching for an access point for 5 minutes.

e Using a computer that is on the network, type http://access_point_ip_address/ into your browser. (Where access_point_ip_address is the IP address of the device that is used as the Registrar 1) Go to the WPS (Wi-Fi Protected Setup) setting page and input the PIN from the printed page to the Registrar and follow the on-screen instruction.

1The Registrar is normally the access point/router.

Note

The setting page is different, depending on the brand of access point/router. See the instruction manual that came with your access point/router.

7

If you are using your Windows Vista® computer as a Registrar, follow the instructions below.

Note

To use a Windows Vista® computer as a Registrar, you need to register it to your network in advance. See the instruction manual that came with your access point/router.

1Click the button and then Network.

2Click Add a wireless device.

3Choose your printer and click Next.

4Input the PIN from the printed page and then click Next.

5Choose your network that you want to connect to, and then click Next.

6Click Close.

101