Control panel features
SUBNET MASK
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet mask to use.
a
b Press + or - to choose NETWORK. Press Set.
c Press + or - to choose TCP/IP. Press Set.
d Press + or - to choose SUBNET MASK=.
Press Set. The first part of the number will be blinking.
e Press + or - to increase or decrease the number. Press Set to go to the next number.
f
g Press Set to finish the Subnet Mask address.8 An asterisk appears at the end of the LCD.
GATEWAY
This field displays the current gateway or router address used by the machine. If you are not using DHCP or BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network administrator if you are unsure.
a
b Press + or - to choose NETWORK. Press Set.
c Press + or - to choose TCP/IP. Press Set.
d Press + or - to choose GATEWAY=.
Press Set. The first part of the number will be blinking.
e Press + or - to increase or decrease the number. Press Set to go to the next number.
f
g Press Set to finish the Gateway address. An asterisk appears at the end of the LCD.
113