Control panel features
IP BOOT TRIES
This field displays how many times the printer attempts to scan the network to obtain the IP address through the BOOT METHOD you have set (see BOOT METHOD on page 111). The default setting is 3.
a
b Press + or - to choose NETWORK. Press Set.
c Press + or - to choose TCP/IP. Press Set.
d Press + or - to choose IP BOOT TRIES. Press Set.
e Press + or - to set the number of times you wish to try to obtain the IP address. Press Set.
APIPA
The setting of ON will cause the print server to automatically allocate a | 8 |
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the Boot Method you have set (see BOOT METHOD on page 111). Choosing OFF means the IP address doesn’t change, when the print server cannot obtain an IP address through the Boot Method you have set. The default setting for APIPA is ON.
a
b Press + or - to choose NETWORK. Press Set.
c Press + or - to choose TCP/IP. Press Set.
d Press + or - to choose APIPA. Press Set.
e Press + or - to choose ON or OFF. Press Set.
114