Control panel features

Enabling or disabling the wireless network (For HL-5370DW)

If you want to switch the wireless network to enabled/disabled (disabled is the default), please follow these steps:

a Make sure that the power cord is plugged in.

b Turn on the machine and wait until the machine is in the Ready state.

c Hold down Go for 10 seconds. Release Go when the printer prints a Network Configuration page that indicates the current network settings.

Note

If you release Go in less than 10 seconds, the printer will change to the reprint mode.

d Check the text to the right of IEEE 802.11b/g in the Node Type section. Active means that the wireless setting is enabled and Inactive means that the wireless setting is disabled.

8

Note

You can switch the wireless network to enabled/disabled, using the BRAdmin applications or Web Based Management (web browser). For more information, see Changing the print server settings on page 16.

119