Wireless configuration for Windows® using the Brother automatic installer application (For HL-5370DW)

Configuration using the automatic wireless (one-push) method

If your wireless access point/router supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or AOSS™, you can configure the machine easily without knowing your wireless network settings. Your Brother machine has one-push wireless setting mode. This feature automatically detects which mode your access point uses for one-push configuration (SecureEasySetup™, Wi-Fi Protected Setup or AOSS™). By pushing

a button on the wireless access point/router and the machine, you can setup the wireless network and security settings. See the user’s guide for your wireless access point/router for instructions on how to access 4 one-push mode.

1Push Button Configuration

Note

Routers or access points that support SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ have the symbols shown below.

Before configuring the wireless settings

IMPORTANT

The following instructions will install your Brother machine in a network environment using the Brother installer application for Windows® found on the CD-ROM we have provided with the machine.

If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation.

If you have previously configured the wireless settings of the printer, you must reset the print server back to its factory default settings (see Reset the network settings to the factory default on page 118).

If you are using Windows® Firewall or a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once you are sure that you can print, configure the software settings following the instructions.

40