APPENDIX A A - 2
Advanced receiving operations

Operation from extension telephones

If you answer a fax call on an ext ension telephone, or an external
telephone into the correct socket on the MFC, you can make your
MFC take the call by using the Fax Receive Code. When you press
the Fax Receive Code 51, the MFC starts to receive a fax. (See
Fax Detect on page 4-4.)
If the MFC answers a voice call an d pseudo/double-rings for you to
take over, use the Telephone An swer Code #51 to take the call at an
extension phone. (See Setting the F/T Ring Time (Fax/Tel mode
only) on page 4-3.)
If you answer a call and no one is on the li ne, you should assu me that
you’re receiving a manual fax.
■Press 51 and wait for the chirp or until the MFC’s LCD displays
Receiving, and then hang up.
Your caller will have to press Start to send the fax.

For Fax/Tel mode only

When the MFC is in Fax/Tel mode, it will use the F/T Ring Time
(pseudo/double-ringing) to alert you to pick up a voice call.
Lift the external telephone's handset, and then press Tel/R to
answer.
If you’re at an extension phone, you’ll need to lift the handset during
the F/T Ring Time and then press #51 between the pseudo/double
rings. If no one is on t he line, or if someon e wants to send you a fax,
send the call back to the MFC by pressing 51.

Fax/Tel mode in the power save c ondition

Fax/Tel mode does not work in the po wer save condition. The MFC
will not answer telephone or fax calls and will keep ringing.
If you are at an external or exte nsion phone, lift the handset of the
extension phone and talk. If you hear fax tones, hold the handset
until Fax Detect activates your MFC. If the other party says they want
to send you a fax, activate the MFC by pressing 51.