6 - 3 REMOTE FAX OPTIONS (MFC-410CN ONLY)
Turning off Remote Fax Options
If you set the Remote Fax Options to Off and there are faxes in your
MFC’s memory, the LCD will give you two options.
■If you press 1, all unprinted faxes will be printe d and erased
before the setting turns off. If a backup copy has already been
printed it will not be printed again.
■If you press 2, the memory will not be erased and the setting will
be unchanged.
(See Printing a fax from the memory (MFC-410CN only) on page
4-5.)
Setting your Remote Access Code
The remote access code lets you access the Remote Retrieval
features when you are away from your MFC. Before you use the
remote access and retriev al features, you have to set up your ow n
code. The default code is inactive code (--- ).
1
Press Menu/Set, 2, 5, 2.
2
Enter a three-digit code using numbers 0-9 or .
Press Menu/Set. (The preset ‘ ’ cannot be changed.)
3
Press Stop/Exit.
Do not use the same code used for your Fax Receive Code
(51) or Telephone Answer Code (#51
).
(See Operation from extens ion telephones on page A-2.)
You can change your code at any time by entering a new one.
If you want to make your code inactive, press Stop/Exit in Step
2 to restore the inactive setting (--- ).