Press Stop/Exit.
Using a non-Brother cordless external telephone

If your non-brother cordless telephone is connected to the EXT. jack of the machine and you typically carry the cordless handset elsewhere, it is easier to answer calls during the Ring Delay.

If you let the machine answer first, you will have to go to the machine so you can press Hook to send the call to the cordless handset.

Using remote codesFax Receive Code

If you answer a fax call on an extension telephone, you can tell your machine to receive it by dialing the Fax Receive Code 5 1. Wait for the chirping sounds then replace the handset. (See Easy Receive on page 37.)

If you answer a fax call at the external telephone, you can make the machine receive the fax by pressing Black Start, and choosing 2.Receive.

Telephone Answer Code

If you receive a voice call and the machine is in F/T mode, it will start to sound the F/T (double) ring after the initial ring delay. If you pick up the call on an extension telephone you can turn the F/T ring off by pressing # 5 1 (make sure you press this between the rings).

If the machine answers a voice call and pseudo/double rings for you to take over, you can take the call at the external telephone by pressing Hook.

Telephone Services and External devices

Changing the remote codes

The preset Fax Receive Code is 5 1. The preset Telephone Answer Code is # 5 1. If you want to, you can replace them with your own codes.

a Press Menu, 2, 1, 4.

1.Setup Receive

4.Remote Codes

b Press a or b to choose On (or Off). Press OK.

c Enter the new Fax Receive Code. Press OK.

d Enter the new Telephone Answer Code. Press OK.

e7

Note

•If you are always disconnected when accessing your external TAD remotely, try changing the Fax Receive Code and Telephone Answer Code to another three-digit code (such as ### and 999).

•Remote Codes might not work with some telephone systems.

49