Brother MFC-465CN 5Print quality check, Cleaning, Preparing System, Approx 4 Minutes, Set Paper and Press, Start

Setting Up the Machine

The first time the ink cartridges are installed the machine prepares and cleans the ink tube system. This initial process will take more time than a normal cleaning cycle but will happen only once.

The LCD shows:

Cleaning

Preparing System

Approx 4 Minutes

Caution

•DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge.

•DO NOT shake the ink cartridges. If ink stains your skin or clothing, wash with soap or detergent at once.

•DO NOT repeatedly insert and remove the cartridges. If you do so, ink may seep out of the cartridge.

•If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation.

(See Cleaning the print head in Appendix B of the User’s Guide.)

•Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package.

•DO NOT dismantle or tamper with the ink cartridge, this can cause the ink to leak out of the cartridge.

•Brother strongly recommends that you do not refill the ink cartridges provided with your machine. We also strongly recommend that you continue to use only Genuine Brother Brand replacement ink cartridges. Using or attempting to use potentially incompatible inks and/or cartridges in your machine may cause damage to the machine itself and/or it may result in unsatisfactory print quality. Our warranty coverage does not apply to any problem that was caused by the use of unauthorized third party ink and/or cartridges. To protect your investment and guarantee your print quality please continue to replace consumed ink cartridges with only Genuine Brother Branded Supplies.

5Print quality check

1After the cleaning cycle is finished, the LCD shows:

Set Paper and Press

Start

2 Make sure A4, Letter or Legal size paper is loaded in the paper tray.

Press Color Start.

The machine starts printing the Print Quality Check Sheet (only during initial ink cartridge installation).

3 Check the quality of the four color blocks on the sheet.

(black/yellow/cyan/magenta)

Note

Avoid touching the printed surface of the paper immediately after printing, the surface may not be completely dry and may stain your fingers.

9