Brother MFC-465CN 10Setting tone or pulse dialling mode

Setting Up the Machine

6 Press Stop/Exit.

Note

If you make a mistake and want to start again, press Stop/Exit to go back to step 1.

For details, see Entering Text in Appendix C of the User's Guide.

Note

(USA only)

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or electronic device to send any message via a telephone fax machine unless such messages clearly contain, in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machines or such business, other entity or individual.

10Setting tone or pulse dialling mode

Your machine comes set for a Tone dialling service. If you have a Pulse dialling service (rotary), you need to change the dialling mode.

1 Press Menu.

2 Press a or b to choose Initial Setup. Press OK.

3 Press a or b to choose Tone/Pulse. Press OK.

4 Press a or b to choose Pulse (or Tone). Press OK.

5 Press Stop/Exit.

13