STEP 1
Setting Up the Machine
8 While holding the paper tray in place, pull out the paper support 
until it clicks, and then unfold the paper support flap 
.
3Connecting the power cord and telephone line
1 Connect the power cord.
Note
Do not use the paper support flap for Legal size |
|
paper. |
|
Note | 2 Connect the telephone line cord. Connect one |
end of the telephone line cord to the jack on the | |
You can use the photo bypass tray which is | machine marked LINE and the other end to a |
located on the top of the paper tray to print on | modular wall jack. |
photo 4 x 6 in. (10 x 15 cm) and photo L size paper. |
|
For details, see Loading photo paper in Chapter 2 |
|
of the User’s Guide. |
|
Improper Setup
DO NOT connect the interface cable. Connecting the interface cable is done during the software installation process.
6