STEP 1 Setting Up the Machine

1Removing the protective parts

1Remove the protective tape and film covering the scanner glass.

2Remove the foam bag (1) containing the ink cartridges from on top of the paper tray.

1

2Loading paper

You can load up to 100 sheets of 20 lb (80 g/m2) paper.

For details, see Acceptable paper and other media in Chapter 2 of the User’s Guide.

1 Pull the paper tray completely out of the machine and lift the output paper tray cover (1).

Improper Setup

DO NOT connect the interface cable. Connecting the interface cable is done during the software installation process.

1

2 Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size.

1

2

4