STEP 1 Setting Up the Machine

Note

Do not throw away the yellow protective part. You will need it if you transport the machine.

4 Take out the ink cartridge.

5 Carefully remove the protective yellow cap (1).

1

Improper Setup

DO NOT touch the area shown in the illustration below.

6

7

Install each ink cartridge in the direction of the arrow on the label.

Take care to match the color of the lock release lever (1) with the cartridge color (2), as shown in the diagram below.

2

1

M brother

Lift each lock release lever and gently push it until it clicks, and then close the ink cartridge cover.

Note

If the protective yellow cap comes off when you open the bag, the cartridge will not be damaged.

Note

If the LCD prompts you to re-insert the ink cartridge correctly, after you install the ink cartridges, check that the ink cartridges are installed properly.

8