STEP 2
Installing the Driver & Software
Windows®
12 Carefully route the USB cable through the trench and out the back of the machine as shown below and connect the cable to your computer.
USB
Windows®
14 Turn on the machine by connecting the power cord.
The installation of the Brother drivers will automatically start. The installation screens appear one after another. Please wait, it will take a few seconds for all the screens to appear.
Improper Setup
•DO NOT connect the machine to a USB port on a keyboard or a
•Make sure that the cable does not restrict the cover from closing, or an error may occur.
•Make sure you use a USB 2.0 cable that is no longer than 6 feet (2 meters) long.
13 Lift the scanner cover to release the lock 
.
Gently push the scanner cover support down 
and close the scanner cover 
.
Improper Setup
DO NOT try to cancel any of the screens during this installation.
15 When the
16 Click Finish to restart your computer. After restarting the computer, you must be logged on with Administrator rights.
Note
After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results window will be shown. If the Diagnostics shows a failure, please follow the
Start/All
20