STEP 2 Installing the Driver & Software

Windows®

For Network Interface Users

2(For Windows® 2000 Professional/XP/

XP Professional x64 Edition/Windows Vista™)

Windows® Network

Important

Make sure that you have finished the instructions from STEP 1 Setting Up the Machine on pages 4 through 14.

Note

•The supplied CD-ROM includes ScanSoft™

PaperPort™ 11SE. This software supports Windows® 2000 (SP4 or greater), XP (SP2 or greater), XP Professional x64 Edition and

Windows Vista™ only. Please update to the latest Windows® Service Pack before installing MFL-Pro Suite.

•Please close any applications running before installing MFL-Pro Suite.

•Make sure there are no memory cards or a USB Flash memory drive inserted into the media drives or USB direct interface at the front of the machine.

1 Unplug the machine from the AC outlet.

2 Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position.

4 Carefully route the network cable through the trench and out the back of the machine.Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide both cables through the trench with one on top of the other.

5 Lift the scanner cover to release the lock . Gently push the scanner cover support down and close the scanner cover .

3 Insert the network cable into the LAN socket

6 Turn on the machine by connecting the power

marked with a

symbol. You will find the

LAN socket inside the machine on the left as

shown below.

 

cord.

 

 

22