Troubleshooting and Routine Maintenance

101

Machine feeds mul tiple pages Make sure th e paper is loaded prop erly in the paper tray. (S ee Loading paper and
other mediaon page 16.)
Check that more than two types o f paper are not loaded in th e paper tray at any
one time.
Printed pages are not stacked
neatly.
Make sure you are usin g the paper support flap. (See Loading p aper and other
mediaon page 16.)
Printed pages double-feed and
cause a paper jam.
Make sure you pull out the paper support until it clicks and unfold the paper
support flap.
Machine does not print from Paint
Brush.
Try setting the Display settin g to ‘256 colors.’
Machine does not print from Adobe
Illustrator. Try to reduce the prin t resolution. (See Printing for Windows® or Printing and
Faxing for Macintosh® in the Software User’s Guide on the CD-ROM.)
The machine cannot print full
pages of a document.
Out of Memory message
occurs.
Reduce the printing re solution. (See Printin g for Windows® or Printing and Faxing
for Macintosh® in the Software User’s Guide on the CD-ROM.)
Reduce the complexity of your document and try again. Reduce the graphic
quality or the number of font sizes within your application software.
Printing Received Faxes
Difficulty Suggestions
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
Received color fax prin ts only in
black and white.
Replace the color ink c artridges that are empty or ne arly empty, and t hen ask the
other person to send t he color fax again. (See Replacing the ink
cartridgeson page 113.)
Left and Right margins a re cut off or
a single page is printed on two
pages.
Turn on Auto Reductio n. (See Printing a reduced incoming faxon page 40.)
Phone Line or Connections
Difficulty Suggestions
Dialing does not work. (No dial
tone)
Check that the machin e is plugged in and switched on.
Check all line cord connection s.
(Canada only) Change Tone/Pulse setting. (See the Quick Setup Guide.)
If an external phone is connected to the machine, send a manual fax by lifting the
handset of the external phone and dialing the number. Wait to hear fax receiving
tone before pressing BlackStart or Color Start.
Printing (Continued)
Difficulty Suggestions