PhotoCapture Center®: Printing photos from a memory card or USB Flash memory drive
101
14
gEnter the number of copies you want
using the dial pad.
hDo one of the following:
Change the print settings. (See
page 106.)
If you do not want to change any
settings, press Color Start to print.
Photo Effects 14
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge
the view of the image by pressing l. To go
back to the original size, press l again.
• The Photo Effects feature is supported by
technology from Reallusion, Inc.
Auto Correct 14
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
aMake sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
bPress a or b to choose
Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose Auto Correct.
Press OK.
ePress OK and a or b to increase or
decrease the number of copies.
fDo one of the following.
Press OK and change the print
settings. (See page 106.)
If you do not want to change any
settings, press Color Start to print.
Note
If Remove Red-Eye appears on the LCD,
press # to remove red-eye from your
photo.
Enhance Skin-Tone 14
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
color in your photos and adjusts the image.
aMake sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
bPress a or b to choose
Photo Effects.
Press OK.
cPress d or c to choose your photo.
Press OK.
dPress a or b to choose
Enhance Skin-Tone.
Press OK.
Note
You can also adjust the effect level
manually, by pressing a or b.
ePress OK and a or b to increase or
decrease the number of copies.
fDo one of the following.
Press OK and change the print
settings. (See page 106.)
If you do not want to change any
settings, press Color Start to print.