Brother MFC-685CW - page 56

Chapter 5
40
Setting your changes as the
new default 5
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Scan Size you use
most often by setting them as default. These
settings will stay until you change them again.
aPress (Fax).
bPress a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
cAfter changing the last setting, press a
or b to choose Set New Default.
Press OK.
dPress 1 to choose Yes.
ePress Stop/Exit.
Restoring all settings to the
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
aPress (Fax).
bPress a or b to choose
Factory Reset.
Press OK.
cPress 1 to choose Yes.
dPress Stop/Exit.
Sending a fax manually 5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
aPress (Fax).
bLoad your document.
cTo listen for a dial tone do one of the
following:
(MFC-685CW)Press
Speaker Phone or pick up the
handset.
(MFC-885CW) Press
Speaker Phone on the machine.
dDial the fax number.
eWhen you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass press
1 to send a fax.
fReplace the handset.
Sending a fax at the end of a
conversation 5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
aAsk the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
bLoad your document.
cPress Black Start or Color Start.
If you are using the scanner glass,
press 1 to send a fax.
dReplace the handset.