Brother MFC-685CW Additional Message Center o peratio ns

Message Center
71
9
Additional Message
Center operations 9
Setting maximum time for
incoming messages 9
Your machine’s default setting will save
incoming messages up to 30 seconds long.
To change this setting follow the steps below:
aPress Menu.
bPress a or b to choose Fax.
Press OK.
cPress a or b to choose
Setup Msg Ctr.
Press OK.
dPress a or b to choose ICM Max.Time.
ePress d or c to choose the maximum
time setting for incoming messages (30,
60, 120 or 180 seconds).
Press OK.
fPress Stop/Exit.
Setting toll saver 9
When the toll saver feature is on, the machine
will answer after two rings if you do have
voice or fax messages, and after four rings if
you do not have any messages.
This way, when you call your machine for
remote retrieval, if it rings three times, you
have no messages and can hang up to avoid
a toll charge.
The toll saver feature is only available when
Message Center mode is on. When toll saver
is On, it overrides your ring delay setting.
If you are using Distinctive Ring, do not use
the Toll Saver feature.
aPress Menu.
bPress a or b to choose Fax.
Press OK.
cPress a or b to choose
Setup Receive.
Press OK.
dPress a or b to choose Ring Delay.
Press OK.
ePress a or b to choose Toll Saver.
fPress d or c to choose On (or Off).
Press OK.
gPress Stop/Exit.