Chapter 9
70
Managing your
messages 9
Message indicator 9
The light flashes if there are any new
messages waiting for you.
The LCD displays the total number of voice
and fax messages stored in the Message
Center memory.
Fax messages are only stored when Fax
Storage or Fax Preview is turned on. See
Advanced fax operations (Black & White
only) on page 73.
Playing voice messages 9
All messages are played in the order they
were recorded. The LCD shows the number
of the current message, the total number of
messages, and the time and date the
message was recorded.
Follow the steps below to listen to your voice
messages:
aPress Play/Record or Play.
The following commands are available
when playing messages:
bPress Stop/Exit.
Erasing incoming messages 9
To erase voice messages individually 9
aPress Play/Record or Play.
The machine will sound a two second
beep and begins message playback.
Each message is preceded by one long
beep, and followed by two short beeps.
bTo erase a specific message, press
Erase immediately after the two short
beeps, or while the message is playing.
cDo one of the following:
Press 1 to erase the message.
Press 2 to cancel.
dPress Stop/Exit.
To erase all of your messages 9
aPress Erase.
The LCD displays the following:
Erase All Voice?
Yes iPress 1
No iPress 2
bDo one of the following:
Press 1 to erase all of your voice
messages.
Press 2 to cancel.
l (RWD) Repeats a message.
# (FWD) Skips to the next message.
or Adjusts the volume.