Chapter 10
82
Retrieving fax messages 10
You can call your machine from any touch
tone telephone and have your fax messages
sent to a fax machine. Before you use this
feature, you have to turn on Fax Storage.
aDial your fax number.
bWhen your machine answers, enter
your remote access code (3 digits
followed by l) at once. If you hear one
long beep, you have messages.
cWhen you hear two short beeps, press
962.
dWait for the long beep, enter the number
(up to 20 digits) of the remote fax
machine you want your fax messages
sent to using the dial pad, then enter # #.
Note
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
eHang out after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Changing your Fax
Forwarding number 10
You can change the default setting of your fax
forwarding number from another touch tone
telephone or fax machine.
aDial your fax number.
bWhen your machine answers, enter
your remote access code (3 digits
followed by l) at once. If you hear one
long beep, you have messages.
cWhen you hear two short beeps, press
954.
dWait for the long beep, enter the new
number (up to 20 digits) of the remote
fax machine you want your fax
messages forwarded to using the dial
pad, then enter # #.
Note
Do not use l and # as dial numbers.
However, press # if you want to create a
pause.
ePress 9 0 to reset the machine when you
have finished.
fHang up after you hear your machine
beep.
98 Change the Receive Mode
1 Msg Ctr If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90 Exit Pressing 9 0 allows you to exit remote retrieval. Wait for the
long beep, then replace the handset.
Remote commands Operation details