94
The network scanning feature
does not work.
The network PCFax Receive
feature does not work.
The network printing feature does
not work.
(For Windows® only) The firewall setting on your PC may be rejecting the
necessary network connection. Follow the instructions below to configure
Windows® Firewall. If you are using other personal firewall software, see the
User’s Guide for your software or contact the software manufacturer.
For Windows® XP SP2 users:
aClick the Start button, Control Panel, Network and Internet
Connections and then Windows Firewall. Make sure that Windows
Firewall on the General tab is set to On.
bClick the Advanced tab and Settings... button of the Network
Connection Settings.
cClick the Add button.
dTo add port 54925 for network scanning, enter the information below:
1. In Description of service: Enter any description, for example “Brother
Scanner”.
2. In Name or IP address (for example 192.168.0.12) of the computer
hosting this service on your network: Enter “Localhost”.
3. In External Port number for this service: Enter “54925”
4. In Internal Port number for this service: Enter “54925”.
5. Make sure UDP is chosen.
6. Click OK.
eClick the Add button.
fTo add port 54926 for network PC Fax, enter the information below:
1. In Description of service: Enter any description, for example “Brother
PC Fax”.
2. In Name or IP address (for example 192.168.0.12) of the computer
hosting this service on your network: Enter “Localhost”.
3. In External Port number for this service: Enter “54926”.
4. In Internal Port number for this service: Enter “54926”
5. Make sure UDP is chosen.
6. Click OK.
gIf you still have trouble with your network connection, click the Add button.
hTo add port 137 for network scanning, network printing and network PC
Fax receiving, enter the information below:
1. In Description of service: - Enter any description, for example “Brother
PC Fax receiving”
2. In Name or IP address (for example 192.168.0.12) of the computer
hosting this service on your network: Enter “Localhost”.
3. In External Port number for this service: Enter “137”.
4. In Internal Port number for this service: Enter “137”.
5. Make sure UDP is chosen.
6. Click OK.
iMake sure if the new setting is added and is checked, and then click OK.

Network difficulties (MFC-7440N and MFC-7840W only) (continued)

Difficulties Suggestions