Loading paper and documents
15
2
Type and size of paper 2
The machine loads paper from the installed
standard paper tray or manual feed slot.
Standard paper tray 2
Since the standard paper tray is a universal
type, you can use any of the paper sizes (one
paper type and size at a time) listed in the
table in Paper capacity of the paper trays
on page 15. The standard paper tray can
hold up to 250 sheets of Letter/A4 size paper
(80 g/m2). Paper can be loaded up to the
maximum paper mark on the sliding paper
width guide.
Manual Feed Slot 2
The manual feed slot can hold a sheet with a
size of 76.2 to 220 mm wide and 116 to
406.4 mm long. You can use the manual feed
slot if you are using special paper, envelopes
or labels.
Paper capacity of the paper trays 2
Recommended paper specifications 2
The following paper specifications are suitable for this machine.
Paper size Paper types No. of sheets
Paper Tray A4, Letter, Executive,
A5, A6, B5, B6.
Plain paper and recycled
paper
up to 250
[80 g/m2]
Transparency up to 10
Manual Feed Slot Width: 76.2 to 220 mm
Length: 116 to 406.4 mm
Plain paper, recycled
paper, bond paper,
envelopes, labels and
transparencies
1
Basis weight 75-90 g/m2
Thickness 80-110 µm
Roughness Higher than 20 sec.
Stiffness 90-150 cm3/100
Grain direction Long grain
Volume resistivity 10e9-10e11 ohm
Surface resistivity 10e9-10e12 ohm-cm
Filler CaCO3 (Neutral)
Ash content Below 23 wt%
Brightness Higher than 80 %
Opacity Higher than 85 %