Chapter 12
72
Adjusting contrast 12
Contrast 12
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the steps below:
aMake sure you are in Copy mode .
bLoad your document.
cUse the dial pad to enter the number of
copies (up to 99).
dPress Options.
Press a or b to choose Contrast.
Press OK.
ePress a or b to increase or decrease the
contrast.
Press OK.
fPress Start.
To change the default setting follow the steps
below:
aPress Menu, 3, 2.
bPress a or b to increase or decrease the
contrast.
Press OK.
cPress Stop/Exit.
Making N in 1 copies
(page layout) 12
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
Important 12
Please make sure the paper size is set to
Letter or A4.
(P) means Portrait and (L) means
Landscape.
You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
aMake sure you are in Copy mode .
bLoad your document.
cUse the dial pad to enter the number of
copies (up to 99).
dPress Options.
ePress a or b to choose Page Layout.
Press OK.
fPress a or b to choose 2in1(P),
2in1(L), 4in1(P),
4in1(L) or Off(1 in 1).
Press OK.
gPress Start to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to h.
hAfter the machine scans the page,
press 1 to scan the next page.
Next Page?
1.Yes 2.No
iPut the next page on the scanner glass.
Press OK.