Configuring your machine for a wireless network

Confirm your network environment

Connected to a computer with a WLAN access point/router in the network (Infrastructure mode)

13

42

3

1WLAN access point/router 1

1If your computer supports Intel® My WiFi Technology (Intel® MWT), you can use your computer as a Wi-Fi Protected Setup supported access point.

2Wireless network machine (your machine)

3Wireless capable computer connected to the WLAN access point/router

4Wired computer (which is not wireless capable) connected to the WLAN access point/router with an Ethernet cable

Install method

The following instructions will offer four methods for installing your Brother machine in a wireless network environment. Choose the method you prefer for your environment.

Wireless configuration temporarily using a USB cable (Recommended for Windows® users) See Wireless configuration temporarily using a USB cable uu page 11.

Wireless configuration temporarily using an Ethernet cable

See Wireless configuration temporarily using an Ethernet cable (For MFC-J825DW/J835DW/J5910DW and DCP-J925DW)uu page 14.

One push wireless configuration using WPS or AOSS™

See One push configuration using Wi-Fi Protected Setup or AOSS™ uu page 17.

Wireless configuration using the Setup Wizard from the control panel

See Configuration using the machine’s control panel Setup Wizard uu page 23.

9