Configuring your machine for a wireless network

Configuration using the machine’s control panel Setup Wizard

You can use the machine’s control panel to configure your wireless network settings. By using the control panel Setup Wizard function, you can easily connect your Brother machine to your wireless network. You

must know your wireless network settings before you proceed with this installation.

IMPORTANT

3

If you have previously configured the wireless settings of the machine, you must reset the LAN settings before you can configure the wireless settings again.

To reset the LAN settings, see Restoring the network settings to factory default uu page 41.

Manual configuration from the control panel

For MFC-J425W/J430W/J432W/J435W

a Before configuring your machine we recommend you write down your wireless network settings. You will need this information before you continue with the configuration.

Item

Record the current wireless network settings

SSID (Network Name):

 

 

 

Network Key

 

 

 

b Press Menu.

 

c Press a or b to choose Network.

 

Press OK.

 

d Press a or b to choose Setup Wizard. Press OK.

e When Enable WLAN? is displayed, press OK to accept. This will start the wireless setup wizard.

To cancel, press Stop/Exit.

23