Security features (MFC-J5910DW only)

Sending an E-mail with user authentication

This machine supports POP before SMTP and SMTP-AUTH methods to send an E-mail via an E-mail server that requires a user authentication. These methods prevent an unauthorized user from accessing the E-mail server. You can use Web Based Management and BRAdmin Professional 3 to configure these settings. You can use POP before SMTP and SMTP-AUTH methods for E-mail Notification, E-mail reports and Internet fax sending.

E-mail server settings

You need to match the settings of SMTP authentication method with the method used by your E-mail server.

Set the machine's SMTP Server Authentication Method setting to POP before SMTP or SMTP-AUTH according to the authentication method used by your E-mail server.

Contact your network administrator or your ISP (Internet Service Provider) about the E-mail server configuration.

SMTP settings

You can change the SMTP port number using Web Based Management. This is useful if your ISP (Internet

7

Service Provider) implements the “Outbound Port 25 Blocking (OP25B)” service.

If you can use both POP before SMTP and SMTP-AUTH, we recommend choosing SMTP-AUTH.

If you choose POP before SMTP for the SMTP Server Authentication Method, you need to configure the POP3 settings. You can also use the APOP method if needed.

72